Bridge

You are currently viewing the documentation for the latest version (2.2.0). To access a different version, click the "Switch version" button located in the upper-right corner of the page.

■ If you are not sure which version of the product you are currently using, please feel free to contact Mech-Mind Technical Support.

Function

This Step transfers data to other projects.

Usage Scenario

This Step is a general data transmission Step. It is usually used when data needs to be transferred across projects to achieve collaboration between projects.

Input and Output

This Step has no input or output ports.

Parameter Description

Parameter	Description
Port List	Description: This parameter is used to set the output data port for the project to receive data. Instruction: Click the Open the editor button and configure Step ports in the Port Setting Assistant window. The detailed instructions are as follows: Select the called project from the drop-down list of Opened project. Select the Step whose data you want to transfer from the drop-down list of Step Name. Select the port number of the called Step in Port No. to specify the data items to be transferred. Ports are numbered from left to right. After configuration, click Add. In this case, a record including the project path, Step name, and port number will be displayed in the window.
Max Timeout [s]	Description: This parameter specifies the maximum wait time for data transmission. An error will occur if the timeout occurs. Default value: 100
Stop Early	Description: This parameter is used to control whether the called project stops executing immediately after data transmission. Default setting: Unselected Instruction: If this option is selected, the called project will stop immediately after all data to be transmitted is generated, and no further Steps will be executed. If this option is not selected, the called project will continue to run until the end of the process.
Run Last Project in Current Thread	Description: Once this option is selected, the execution complexity of nested multi-layer projects can be reduced. Default setting: Unselected

Parameter

Description

Port List

Description: This parameter is used to set the output data port for the project to receive data.

Instruction: Click the Open the editor button and configure Step ports in the Port Setting Assistant window. The detailed instructions are as follows:

Select the called project from the drop-down list of Opened project.
Select the Step whose data you want to transfer from the drop-down list of Step Name.
Select the port number of the called Step in Port No. to specify the data items to be transferred. Ports are numbered from left to right.
After configuration, click Add. In this case, a record including the project path, Step name, and port number will be displayed in the window.

Max Timeout [s]

Description: This parameter specifies the maximum wait time for data transmission. An error will occur if the timeout occurs.
Default value: 100

Stop Early

Description: This parameter is used to control whether the called project stops executing immediately after data transmission.
Default setting: Unselected
Instruction: If this option is selected, the called project will stop immediately after all data to be transmitted is generated, and no further Steps will be executed. If this option is not selected, the called project will continue to run until the end of the process.

Run Last Project in Current Thread

Description: Once this option is selected, the execution complexity of nested multi-layer projects can be reduced.
Default setting: Unselected

Is this page helpful?

Leave a feedback

Bridge

Function

Usage Scenario

Input and Output

Parameter Description

Is this page helpful?

Thanks for your support!

You can give a feedback in any of the following ways:

We Value Your Privacy