Which third-party cameras does Mech-Vision support?

You are currently viewing the documentation for the latest version (2.1.2). To access a different version, click the "Switch version" button located in the upper-right corner of the page.

■ If you are not sure which version of the product you are currently using, please feel free to contact Mech-Mind Technical Support.

The third-party cameras that can be connected to Mech-Vision are listed in the table below.

Item Camera type Related Step Recommended client version Notes

Hikvision

2D camera

Camera 2D

MVS 3.3.1

  • Related driver should be installed.

  • The camera2d_mvs plugin should be installed in Mech-Vision.

DAHENG

2D camera

Camera 2D

2.7.2305.8081

The camera2d_mer plugin should be installed in Mech-Vision.

iRayple

Camera 2D

Camera 2D

2.3.0_Build20210730

The camera2d_hray plugin should be installed in Mech-Vision.

Cameras supporting eBUS

2D camera

Camera 2D

eBUS Player 6.2.8

  • The camera2d_ebus plugin should be installed in Mech-Vision.

  • The images captured by the camera have a "Pleora" watermark, which does not affect normal functionality. To remove it, you would need to purchase the runtime license for cameras supporting eBUS.

    • If the camera uses the GigE protocol, you need to purchase a gev-rx license.

    • If the camera uses the USB protocol, you need to purchase a u3v-rx license.

    • If you do not want to purchase the runtime license for cameras supporting eBUS, you can try to use the Calc Results by Python Step to capture images by calling the Python interface of third-party cameras.

Is this page helpful?

You can give a feedback in any of the following ways:

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept