When Master-Control communication or Standard Interface communication is used, how to determine the velocity of the real robot?

You are currently viewing the documentation for the latest version (2.1.0). To access a different version, click the "Switch version" button located in the upper-right corner of the page.

■ If you are not sure which version of the product you are currently using, please feel free to contact Mech-Mind Technical Support.

  • For Master-Control communication:

    • The velocity of the real robot = the velocity set in the toolbar of Mech-Viz% × the velocity set in Basic move settings for a Step% × the execution velocity displayed on the teach pendant%

  • For Standard Interface communication: the waypoint velocity in the Standard Interface command = the velocity set in the toolbar of Mech-Viz% × the velocity set in Basic move settings for a Step%

    • If the waypoint velocity in the Standard Interface command is used by the robot program, the velocity of the real robot = the waypoint velocity in the Standard Interface command% × the execution velocity displayed on the teach pendant%

    • If the waypoint velocity in the Standard Interface command is not used, and the velocity is directly defined in the robot program, the velocity of the real robot = the execution velocity displayed on the teach pendant% × the velocity defined in the robot program%

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept