Parameter Adjustment in the Cables Scenario

You are currently viewing the documentation for the latest version (2.1.0). To access a different version, click the "Switch version" button located in the upper-right corner of the page.

■ If you are not sure which version of the product you are currently using, please feel free to contact Mech-Mind Technical Support.

In the cables scenario, the Cable_Seg_RGBGrasp picking configuration folder should be used, and then you can see all related parameters.

Parameter Adjustment Order

  1. Set a Working Distance first to limit the range for the camera to capture the data.

  2. Adjust the Pose Processing parameter group to control the upward offset along the Z-axis to avoid damaging the object.

Parameter Description

Working Distance

Minimum Working Distance

Description: This parameter is used to specify the minimum distance (in millimeters) between the camera and the object in the scene. If a bin is used, this parameter should be the distance from the camera to the top edge of the bin. Please set the value according to the actual situation.

Default value: 0 mm

Value range: 0–3000 mm

Maximum Working Distance

Description: This parameter is used to specify the maximum distance (in millimeters) between the camera and the object in the scene. If a bin is used, this parameter should be the distance from the camera to the bottom edge of the bin. Please set the value according to the actual situation.

Default value: 3000 mm

Value range: 0–3000 mm

Pose Processing

Upward Offset along Z-Axis

Description: This parameter is used to specify the offset distance (in millimeters) along Z-axis above the pick point to prevent the robot from squeezing the object. The unit is millimeters.

Default value: 0

Value range: 0–10 mm

Tuning recommendation: Please set the parameter according to the actual situation.

Visualization

The Visualization parameter group is only used for selecting what will be displayed in the Debug Output window and will not affect the adjustment of the above parameters.

Enable

Description: Once this option is selected, you can select the items you want to visualize in the Debug Output window.

Default value: Selected.

Visualization Type

Description: This parameter is used to specify the items you want to visualize.

Options:

  • Final Score

  • Show Pose Height

Default value: Final Score

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.