Easy Create Number List

You are currently viewing the documentation for the latest version (2.2.0). To access a different version, click the "Switch version" button located in the upper-right corner of the page.

■ If you are not sure which version of the product you are currently using, please feel free to contact Mech-Mind Technical Support.

Function

This Step is used to create number list data. The content can be set in Step parameters.

Usage Scenario

This Step is a general data creation Step. No fixed usage scenarios.

Input Description

Input item	Description
Range End	The open interval cutoff range of the number list. This port is displayed when Input Type is set to Range-based H.

Input item

Description

Range End

The open interval cutoff range of the number list. This port is displayed when Input Type is set to Range-based H.

Parameter Description

Parameter	Description
Setting Method	Parameter description: This parameter specifies the method for generating the number list. Value list: * Manual: Directly input the content of the number list in the parameters. * RangeBased: Generate the number list by setting Start, Stop, and Step.
Value list	Parameter description: When Setting Method is set to Manual, this parameter defines the content of the number list. Each input value serves as an independent element in the number list. Each input value will be an individual element in the list of values.
Start	Parameter description: When Setting Method is set to RangeBased, this parameter sets the start value of the number list. Default value: 0.0000
Stop	Parameter description: When Setting Method is set to RangeBased, this parameter sets the stop value of the number list. Note that the generated number list includes the start value but excludes the stop value. Default value: 1.0000
Step	Parameter description: When Setting Method is set to RangeBased, this parameter sets the step size for generating the number list. The step defines the difference between adjacent elements in the number list. Default value: 1.0000

Parameter

Description

Setting Method

Parameter description: This parameter specifies the method for generating the number list.
Value list:
* Manual: Directly input the content of the number list in the parameters.
* RangeBased: Generate the number list by setting Start, Stop, and Step.

Value list

Parameter description: When Setting Method is set to Manual, this parameter defines the content of the number list. Each input value serves as an independent element in the number list. Each input value will be an individual element in the list of values.

Start

Parameter description: When Setting Method is set to RangeBased, this parameter sets the start value of the number list.
Default value: 0.0000

Stop

Parameter description: When Setting Method is set to RangeBased, this parameter sets the stop value of the number list. Note that the generated number list includes the start value but excludes the stop value.
Default value: 1.0000

Step

Parameter description: When Setting Method is set to RangeBased, this parameter sets the step size for generating the number list. The step defines the difference between adjacent elements in the number list.
Default value: 1.0000

Output Description

Output item	Description
Value list	Number list created.

Output item

Description

Value list

Number list created.

Is this page helpful?

Leave a feedback

Thanks for your support!

You can give a feedback in any of the following ways:

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

I accept

I don't accept