Copy a Project in Mech-MSR
Method 1: Copy All Steps to a New Project
After opening the solution in the home interface of Mech-MSR, you can copy all the Steps of the project and paste them into a new blank project within the same solution.
The detailed instructions are as follows:
-
Select all Steps in the existing project and copy them.
All parameter settings of the Steps will be retained during copying. -
Create a new blank project under the current solution and then paste the copied Steps into the new project.
-
Save the project.
Method 2: Copy the Project Folder
| Do not open the solution to which the project belongs in Mech-MSR until you complete the following operations. Otherwise, the changes may not take effect. |
-
In the solution folder, create a copy of the target project folder.
-
Rename the project folder and the MSR file (
.msr) and modify the project list in the MSOLN file (.msoln) according to your requirements.Note that the project name must remain consistent across all of the above changes.
