Copy a Project in Mech-MSR
Method 1: Copy All Steps to a New Project
After opening the solution in the home interface of Mech-MSR, you can copy all the Steps of the project and paste them into a new blank project within the same solution.
The detailed instructions are as follows:
-
Select all Steps in the existing project and copy them.
All parameter settings of the Steps will be retained during copying. -
Create a new blank project under the current solution and then paste the copied Steps into the new project.
-
Save the project.
Method 2: Copy the Project Folder
| Do not open the solution to which the project belongs in Mech-MSR until you complete the following operations. Otherwise, the changes may not take effect. |
-
In the solution folder, create a copy of the target project folder.
-
Rename the project folder and the MSR file (
.msr) and modify the project list in the MSOLN file (.msoln) according to your requirements.Note that the project name must remain consistent across all of the above changes, and the project ID in the MSOLN file must not duplicate any existing IDs.
