Straighten Ring-Shaped Image Region

You are currently viewing the documentation for a pre-release version (2.2.0). To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

Function

This Step is used to straighten a ring-shaped region in the input image, thereby transforming it into a rectangular region.

Usage Scenario

This Step is a general image processing Step used for subsequent reading of ring-shaped characters.

Input and Output

Input

Input ports	Data type	Description
Image	Image/Color	The specified region in the image input to this port will be straightened.
Alignment Parameter Group	Pose2D	Used to adjust the feature region’s pose in sync with the target object’s pose changes.

Input ports

Data type

Description

Image

Image/Color

The specified region in the image input to this port will be straightened.

Alignment Parameter Group

Pose2D

Used to adjust the feature region’s pose in sync with the target object’s pose changes.

Output

Output ports	Data type	Description
Straightened image	Image	The image formed by straightening the ring-shaped region.

Output ports

Data type

Description

Straightened image

Image

The image formed by straightening the ring-shaped region.

Parameter Description

Parameter	Description
ROI Settings	You can draw a ring-shaped ROI. The system will extract multiple columns of pixels based on the caliper settings, and the edge point pairs detected in each column will be used to detect the ring-shaped region.
Interpolation Method	Parameter description: Select the interpolation method for straightening the ring-shaped region to generate smoother edges and a more natural straightening effect. Value list: Nearest neighbor: This is a faster method, but it results in a coarse image. Bilinear: This is a commonly used method that produces a smoother image.
Radial Direction	Parameter description: This parameter is used to set the radial direction for straightening. Value list: * Clockwise: The ring-shaped region is swept clockwise from the start angle. * Counterclockwise: The ring-shaped region is swept counterclockwise from the start angle.

Parameter

Description

ROI Settings

You can draw a ring-shaped ROI. The system will extract multiple columns of pixels based on the caliper settings, and the edge point pairs detected in each column will be used to detect the ring-shaped region.

Interpolation Method

Parameter description: Select the interpolation method for straightening the ring-shaped region to generate smoother edges and a more natural straightening effect.

Value list:

Nearest neighbor: This is a faster method, but it results in a coarse image.
Bilinear: This is a commonly used method that produces a smoother image.

Radial Direction

Parameter description: This parameter is used to set the radial direction for straightening.
Value list:
* Clockwise: The ring-shaped region is swept clockwise from the start angle.
* Counterclockwise: The ring-shaped region is swept counterclockwise from the start angle.

Is this page helpful?

Leave a feedback

Straighten Ring-Shaped Image Region

Function

Usage Scenario

Input and Output

Input

Output

Parameter Description

Is this page helpful?

Thanks for your support!

You can give a feedback in any of the following ways:

We Value Your Privacy