Transform Point Clouds for Truss

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

Function

This Step is used to transform the input point clouds to the camera reference frame or the truss system reference frame and then output the transformed point clouds.

Usage Scenario

This Step is designed to transform the reference frame of point clouds in automated truss system projects.

If you are using a robot other than the automated truss system, please use the Transform Point Clouds Step.

If you use the wrong transform Step, the position of the point cloud after the transformation will be incorrect, and therefore incorrect pick points will be output.

Input and Output

transform point clouds for truss input and output 2

Parameter Description

Transformation Type

Parameter description: This parameter is used to select the type of point cloud transformation.

Options: CameraToRobot, RobotToCamera.

  • CameraToRobot: Transform the point clouds from the camera reference frame to the truss system reference frame. Please refer to the tuning example for the corresponding result.

  • RobotToCamera: Transform the point clouds from the truss system reference frame to the camera reference frame. Please refer to the tuning example for the corresponding result.

Default setting: CameraToRobot.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.