Step Parameters

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

Fixed-Point Move

This Step specifies a fixed pose as the waypoint.

Whether to send to robot

Description: Determine whether to send the pose of this Step to the robot.

Example: If Plan and not send is selected, the Path Planning Step will not output the pose of this Step.

Motion type

Description: The motion type in which the robot moves to the corresponding pose in this Step.

Example: If joint move is selected, the robot will move to the corresponding pose in this Step with the joint movement.

Robot pose type

Description: Select the method to adjust the pose.

You can follow these steps to input the pose of the real robot.

  1. Move the robot with the teach pendant and record the TCP or joint positions.

  2. Click Edit pose (if the robot pose is in the form of TCP) or Edit JPs (if the robot pose is in the form of joint positions) in the Step Parameters.

  3. Enter the recorded TCP or JPs and click OK. Then the simulated robot will move to the corresponding pose.

Relative Move

This Step specifies the distance the robot moves along the Z-axis relative to the previous or next waypoint.

Whether to send to robot

Description: Determine whether to send the pose of this Step to the robot.

Example: If Plan and not send is selected, the Path Planning Step will not output the pose of this Step.

Motion type

Description: The motion type in which the robot moves to the corresponding pose in this Step.

Example: If joint move is selected, the robot will move to the corresponding pose in this Step with the joint movement.

Move relative to

Description: The reference pose when the robot moves.

Example: If Pre is selected, the robot will move based on the previous waypoint.

Direction

Description: The direction along which the robot moves.

Example: If Along workobject frame Z axis is selected, the robot will move along the Z-axis of the workobject reference frame.

Distance

Description: The distance that the robot moves along the direction of movement.

Vision Move

The vision points input to the Path Planning Step will be used in this Step.

Whether to send to robot

Description: Determine whether to send the pose of this Step to the robot.

Example: If Plan and not send is selected, the Path Planning Step will not output the pose of this Step.

Motion type

Description: The motion type in which the robot moves to the corresponding pose in this Step.

Example: If joint move is selected, the robot will move to the corresponding pose in this Step with the joint movement.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.