Camera Viewer

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

Introduction

The camera user can be used to connect and control the camera to capture images, display 2D images and depth maps, and specify a path to save the files.

In the menu bar, click Camera  Camera Viewer to open the tool. The interface is shown as below.

camera viewer introduce viewer

Operation Procedure

Open the Camera Viewer

To capture images, the camera needs to load the corresponding intrinsic and extrinsic parameters that are saved in the corresponding project folder. Therefore, you need to select a project folder. However, you can also enter the interface without opening any folder.

camera viewer open project dir

Connect to a Camera

  1. In the list of detected camera, click image on the right of the desired camera’s serial No. to connect the camera. After the camera is connected, the icon image will turn into image.

    camera viewer camera list
  2. Click Capture once or Capture live below the Detected cameras panel to capture one image at a time or capture images continuously, and you can see the 2D image and depth map in the left panel in real-time.

Capture and Save Images

If you want to save the captured images, specify a Save Path first in the Capture and Save Images panel, set the Color Image/Depth Image Name, and set the file name index (X th). Lastly, click Capture and Save Current Color/Depth Images to save the files to the specified folder.

camera viewer capture and save images

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.