OPC UA

You are currently viewing the documentation for the latest version (2.2.2). To access a different version, click the "Switch version" button located in the upper-right corner of the page.

■ If you are not sure which version of the product you are currently using, please feel free to contact Mech-Mind Technical Support.

With the standard interface based on the OPC UA protocol, the Communication Component serves as the OPC UA server, and the robot/PLC serves as the client. The two sides exchange data by reading and writing named nodes.

Before configuring this interface, complete the OPC UA Server communication configuration in the Mech-Vision software, including the endpoint address, security mode (certificates), and user authentication.

Is this page helpful?

You can give a feedback in any of the following ways:

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept