Standard Interface Communication FAQ

You are currently viewing the documentation for the latest version (2.1.2). To access a different version, click the "Switch version" button located in the upper-right corner of the page.

■ If you are not sure which version of the product you are currently using, please feel free to contact Mech-Mind Technical Support.

Type	References
Communication establishment	How to Troubleshoot Failed Standard Interface Communications? How to Configure IP Address and Port Number in Robot Communication Configuration? Why Set Host IP Address to 0.0.0.0 When Vision System Acts as Server?
Communication adaptation	How to Make Sure That the Robot Controller Supports Standard Interface Communication?
Standard Interface programs as background programs	How Can the Standard Interface Programs for ABB Robots be Run in the Background? How Can the Standard Interface Programs for KUKA Robots be Run in the Background? How Can the Standard Interface Programs for FANUC Robots be Run in the Background? How Can the Standard Interface Programs for Kawasaki Robots be Run in the Background?
Troubleshooting	[WinError 10013] An Attempt was Made to Access a Socket in a Way That is not Allowed by the Access Control [WinError 10038] An Operation was Attempted on Something That is not a Socket
Network assistance tools	How to Use NetAssist?
PLCs	Why does Pose Data Occasionally Show as 0 Despite Normal Status Code in Siemens PLC Communication? Why does the “Immediate value out of range” Error Occur After Routine Files were Loaded to an AB PLC by Using EtherNet/IP Communication?
Others	FANUC	INTP-311 (MM_GET_POS,XX) Uninitialized data is used OS-144 System Error 5, 11 at 10470c6c or Robot unreachable
ROKAE	Number of Strings Returned by strSplit Function Does Not Match the Predefined Length
YASKAWA	3220: Command Data Syntax Error

Type

References

Communication establishment

How to Troubleshoot Failed Standard Interface Communications?

How to Configure IP Address and Port Number in Robot Communication Configuration?

Why Set Host IP Address to 0.0.0.0 When Vision System Acts as Server?

Communication adaptation

How to Make Sure That the Robot Controller Supports Standard Interface Communication?

Standard Interface programs as background programs

How Can the Standard Interface Programs for ABB Robots be Run in the Background?

How Can the Standard Interface Programs for KUKA Robots be Run in the Background?

How Can the Standard Interface Programs for FANUC Robots be Run in the Background?