Classify

You are currently viewing the documentation for version 1.8.2. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

Function

This Step is used before or after Vision Move to choose different branches according to the workobject labels identified by Mech-Vision.

Usage Scenario

This Step is used to classify the workobject labels identified by Mech-Vision.

Before “Vision Move”: The default picking process: Identify the workobject > Select and operate on different branches according object’s labels > Pick workobjects with the label. Example: Change the gripper for different workobjects.
After “Vision Move”: The default picking process: Identify the object > Pick the object > Operate differently according to the types of workobjects. Example: Use the same gripper to pick and place workobjects into different bins after classification.

Parameter Description

Get Label from “Update Held Workobject”

Selected

An Update Held Workobject Step should be used before this Step, and this Step can acquire the label information of the currently picked workobject and then perform operations according to the classification. Usage Scenario: The label information of the detected workobjects cannot be acquired directly due to the overlapped workpieces or other reasons; therefore, the held workpieces should be re-classified, and then corresponding labels can be output.

Unselected

The default setting. Use the object labels detected by Mech-Vision. Please select the corresponding Vision Move Step for Classify before “Vision Move”.

Load Labels & Add a label

Load Labels	Add multiple labels to Unused Labels at once. Click Load Labels and select a JSON file with multiple labels, as shown below. After that, all label files will be added to Unused Labels, and all the previous labels in both the Unused Labels and the Used Labels will be deleted.
Add a label	Add a label named unnamed_label to Unused Labels. You can double-click the label to re-name it.
Label list	The label list includes Unused Labels and the Used Labels. You can shift the label’s place between the two spaces by clicking or . The Used Labels will appear at the exit port of this Step. There will be a label named Other to filter out labels that are not in the Used Labels space.