Vertical Cylinder

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

Pallet Type

1: Aligned
2: Staggered 1
3: Staggered 2
4: Staggered 3
5: Staggered 4

Even Layer Layout

When Pallet Type is set to Aligned, you can set the Even Layer Layout parameter.

1: Uniform

The layout of all layers is consistent.

2: One row less

Except for the lowest layer, each layer has one fewer row of cylinders than the layer beneath.

3: One column less

Except for the lowest layer, each layer has one fewer column of cylinders than the layer beneath.

4: One row and column less

Except for the lowest layer, each layer has one fewer row and one fewer column of cylinders than the layer beneath.

Row/Column Count

Number of rows/columns of cylinders per layer.

Row/Column Gap

The distance between rows/columns.

Stack Height Settings

Specified Layer Count

Specify the maximum number of layers to be palletized.

Limit Stack Height

Once this option is selected, you can set a Stack Height Upper Limit to limit the maximum height of the stack. When the Specified Layer Count and the Max Layer Count exist at the same time, the setting with fewer layers takes effect.

Limit Workobject Count

Once this option is selected, you can set the Workobject Count to limit the maximum number of objects that can be palletized.

Cylinder Settings

This parameter group is used to set the dimensions of the cylinder.