Communication-Related Functions

You are currently viewing the documentation for the latest version (2.1.0). To access a different version, click the "Switch version" button located in the upper-right corner of the page.

■ If you are not sure which version of the product you are currently using, please feel free to contact Mech-Mind Technical Support.

Symptom:

The communication-related functions of the Vision System are not working, primarily manifested as:

  • In the toolbar of Mech-Vision, the Robot Communication Configuration button is grayed out and unusable.

  • In the toolbar of Mech-Viz, the Master-Control Robot button is grayed out and unusable.

Affected Software Versions:

  • Mech-Vision 1.8.0 and later versions

  • Mech-Viz 1.8.0 and later versions

Possible Cause:

The communication component has not started or it crashed.

Solution:

Please address the issue by the following steps:

  1. Open the Task Manager of the IPC and check if there are any python processes running:

    • If not, please execute the step 2;

    • If so, terminate the processes and restart the software. If the issue still exists, please execute the step 2.

  2. Check if the directory path settings for the communication component are empty.

    • Mech-Vision

    • Mech-Viz

    1. In the Mech-Vision menu bar, select Settings  Options  Common, and select Developer mode. Then, click OK to enable the developer mode.

    2. Select Settings  Options  Advanced, and check if the parameter in Communication ComponentCommunication Component directory path under Communication Settings is empty.

    1. In the Mech-Viz menu bar, select File  Options  Common, and select Developer mode. Then, click OK to enable the developer mode.

    2. Select File  Options  Basic settings, and check if the parameter in Communication Component Communication Component directory path under Communication Settings is empty.

    • If so, please execute the step 3;

    • If not, find the Mmind.ini file in the \AppData\Roaming\Mmind directory, delete the line containing “centerDirPath”, and then restart the software to see if the issue is resolved. If the issue still exists, please execute the step 3.

  3. In the installation directory of the communication component, press shift+Right-click and open powershell. Then, type .\python\python.exe .\src\main.py and press Enter to verify if the communication component can start successfully.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept