Mech-Vision Failed to Output Vision Result After Capturing Images
Symptom:
Mech-Vision had obtained the images, but it did not output any vision result.
Affected Software Versions:
All Mech-Vision versions
Possible Cause:
-
The project was modified.
-
Conditions on site changed.
-
Data flow was broken.
Solution:
If the software failed to output the vision result after the project is being modified, follow these steps to fix it:
-
Solution I: Revert the project modification.
If the project cannot be reverted to the previous configuration, check and modify the Mech-Vision project.
-
Solution II: Use the latest project backup to restore.