Mismatched Image Sizes of Captured Images during Hand-Eye Calibration after Camera Switch

Symptom:

When the camera was switched from a camera with a small FOV to an LSR L/LSR S/DEEP V4 camera and it was used in hand-eye calibration on Mech-Vision 1.5.x, the software prompted the error message “Mismatched image sizes”.

Affected Software Versions:

Mech-Vision 1.5.x

Possible Cause:

LSR L/LSR S/DEEP V4 cameras should work with Mech-Vision 1.6.1 or later.

Solution:

Update Mech-Vision to the latest version.