Mech-Metrics Release Notes

Fixed group: The features in this group participate in every measurement, and the group ID is always 10.

Rotating group: Each rotating group contains multiple alternative features. Only one rotating group participates in each measurement, achieving a “round-robin use” effect. The group ID is a composite ID of the fixed group and the rotating group (11–9999).

The robot program can specify the combination of features participating in the current measurement through the measurement group ID in command 801, flexibly controlling the feature scope of a single measurement.

In the status bars of the Configuration and Production interfaces, you can filter the features displayed in the measurement results table by measurement group.

The Pareto chart supports filtering statistics data by measurement group.

It can connect to the primary IPC from the secondary IPC to retrieve the measurement data and snapshots of a specified part.

It supports adding views and feature annotations in the 3D view as a reference for repair operations.

It supports starting the PLC communication service, so that PLC devices can query part historical data through command 805.

Multiple alignment methods can be activated at the same time, and each alignment method can apply to different features, facilitating multi-robot management.

Alignment Overview is added, where you can centrally view the scope features of each alignment method.

The resource tree supports feature search.

The 3D view supports picking circle, slot, and square hole features from the CAD with one click of the mouse.

The batch import features and batch export features operations are added to feature management, facilitating the reuse of feature configurations across projects. For details, see Other Feature Management Operations.

When associating measurement records with CMM reports, you can use Pre-assign to batch assign part aliases in sequence.

You can save the current working state and continue the configuration the next time you open the correlation compensation tool.

Data filtering supports selecting multiple parts.

When evaluating historical data, you can switch the tolerance evaluation method. In the menu bar, select Settings  Options  Advanced, and then you can select “Use tolerances recorded at measurement” or “Re-evaluate with current project tolerances”.