Getting Started

You are currently viewing the documentation for version 1.8.0. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

Example Projects

A variety of built-in example projects are provided in Mech-Viz to help you get familiar with the software quickly. These projects cover common usage scenarios, and you can run the example projects to see the operation effect.

Taking Basic Pick and Place project under the category of Simple handling for example, this section will describe how to open and run the example project (The same operation method goes to other projects).

Go to File>New>Example projects, click the Basic Pick and Place project card, and then click Choose Project in the project description panel to open the project.
Click Simulate in the upper-left corner of the interface.
Click Start simulation in the pop-up Select Vision Record to Use window.

Click the Pause button to pause simulation.
Click the Stop button to stop simulation.
To change the example project, select other example projects in the File>New>Example projects when the project in use stops.
To reduce the speed of robot, modify Vel. and Acc.on the toolbar when the project in use stops.

Create a Project

The process of building and configuring a Mech-Viz project usually consists of the following steps:

Click File>New>New blank project.
Select a robot model in the Robot Model Library.
Configure the resources, including tool, workobject, scene, etc., in the project.
Build a workflow, i.e. robot control logic.
Simulate and improve the project.

Getting Started

Example Projects

Create a Project

We Value Your Privacy