Change Circular Motion Direction of Path

You are currently viewing the documentation for version 1.8.0. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

Contents of this Step are under maintenance. If you need more information about this Step with urgency, please contact us at docs@mech-mind.net.

Function

This Step adjusts the circular motion direction of a path.

Usage Scenario

This Step is usually used in door/glass gluing applications. If the robot encounters a soft limit during the movement, the start and end points will be switched, and the robot will move along the newly set targets.

Input and Output

Input:
1. Original path consisting of the targets input to this port will be adjusted.
2. List of robot end effector targets in the original path.
3. List of robot end effector targets in the original path in the flange reference frame.
Output:
1. Adjusted targets that form the path whose circular motion direction has been adjusted.

Change Circular Motion Direction of Path

Function

Usage Scenario

Input and Output

We Value Your Privacy