ABB

You are currently viewing the documentation for version 1.7.4. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

This topic introduces the Master-Control program for ABB robots and the procedure of setting up the communication with a robot through the program.

If you are using an IRC5 controller, and the version of RobotWare is 6.02 or higher, please read the following content.

ABB Setup Instructions (RobotWare 6)

If you are using an OmniCore controller, and the version of RobotWare is 7.3 or higher, please read the following content.

ABB Setup Instructions (RobotWare 7)

For the description of the Master-Control program, please read the following content.

ABB Master-Control Program Description

ABB

We Value Your Privacy