Configure UDP Communication
This section introduces how to configure the UDP communication. Before configuration, please confirm that you have already selected the robot and entered the communication configuration interface.
-
On the Communication mode interface, set the “Interface service type” parameter to Standard Interface, set the “Protocol” parameter to UDP Server, and set the data transmission format based on support for HEX and ASCII.
-
In the IP Address area, enter the port number of the host.
The port number should be set to 50000 or larger.
-
(Optional) Select Auto enable interface service when opening the solution. When the solution is opened, you do not need to start the interface service manually.
-
Click the Apply button.
Next, you need to complete the remaining standard interface configuration according to the communication object.