Filter Point Cloud by Model and Poses

You are currently viewing the documentation for version 1.8.3. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

This Step is outdated. Please use the newer Step Remove Cloud Points from Point Cloud instead. If you need more information about this Step with urgency, please contact us at docs@mech-mind.net.

Function

This Step compares the input point cloud with the model loaded in the parameters, and overlapped points will be removed.

Usage Scenario

This Step is usually used to remove/obtain the point cloud parts corresponding to the models from the scene.

Input and Output

  • Input:

    1. Point cloud input to this port will be filtered.

    2. Poses used to transform the models into the scene.

  • Output:

    1. Remaining point cloud

    2. Removed point cloud

Is this page helpful?

You can give a feedback in any of the following ways:

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept