Tool

You are currently viewing the documentation for a pre-release version (2.6.1). To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

Mech-Eye Viewer provides the following tools. This topic introduces the functions and usages of the tools and provides detailed instructions.

Tool	Function
Custom Reference Frame	This tool is used to define a custom reference frame for display. The depth map and point cloud can be displayed in the custom reference frame.
Measurement Tool	This tool is used to measure the point-to-point distance, point-to-line distance, and height difference in the profile, in order to check if the target object meets the design accuracy requirements.
Encoder and Input Signal Viewer	This tool is used to view the signals input to the laser profiler from the encoder and other external devices, check if the signals are input correctly, and verify the input timing and duration of logic signals, etc.
Data Replay Tool	This tool is used to acquire depth data and adjust parameters offline to optimize the profile extraction effect and point cloud quality.
Warm-Up Tool	This tool is used to warm up the laser profiler.
Encoder Settings	This tool is used to check the encoder value and motion direction, calculate the encoder resolution and obtain the recommended trigger interval. The recommended trigger interval ensures that the Y-axis resolution of the scan data is basically equal to the X-axis resolution.
Height Correction	This tool is used to correct the height error in the profile, which is caused by the rotation of the laser profiler around the X-axis.
Tilt Correction	This tool is used to correct the tilt of the profile, which is caused by the rotation of the laser profiler around the Y-axis.
Motion Direction Calibration	This tool is used to correct the distortion in the point cloud caused by the inconsistency between the actual motion direction and the axis direction of the laser profiler.
Rotation Calibration	This tool is used to calibrate the spatial relationship between the rotation axis of the rotating table and the laser profiler reference frame. It is suitable for applications where the target object rotates around a fixed axis and the laser profiler is mounted fixedly.
Dynamic ROI	This tool is used to configure a region of interest (ROI) that dynamically changes along the scanning direction, narrowing the Z-Axis measurement range while ensuring complete coverage of the target contour, thus improving the scan frame rate.
Blind Spot Filtering	This tool identifies and removes false data caused by blind spots, thereby avoiding influence on further data processing.
X-Axis Profile Alignment	This tool corrects the X-axis vibrations in the profiles.
Z-Axis Profile Alignment	This tool corrects the Z-axis vibrations in the profiles.

Tool

Function

Custom Reference Frame

This tool is used to define a custom reference frame for display. The depth map and point cloud can be displayed in the custom reference frame.

Measurement Tool

This tool is used to measure the point-to-point distance, point-to-line distance, and height difference in the profile, in order to check if the target object meets the design accuracy requirements.

Encoder and Input Signal Viewer

This tool is used to view the signals input to the laser profiler from the encoder and other external devices, check if the signals are input correctly, and verify the input timing and duration of logic signals, etc.

Data Replay Tool

This tool is used to acquire depth data and adjust parameters offline to optimize the profile extraction effect and point cloud quality.

Warm-Up Tool

This tool is used to warm up the laser profiler.

Encoder Settings

This tool is used to check the encoder value and motion direction, calculate the encoder resolution and obtain the recommended trigger interval. The recommended trigger interval ensures that the Y-axis resolution of the scan data is basically equal to the X-axis resolution.

Height Correction

This tool is used to correct the height error in the profile, which is caused by the rotation of the laser profiler around the X-axis.

Tilt Correction

This tool is used to correct the tilt of the profile, which is caused by the rotation of the laser profiler around the Y-axis.

Motion Direction Calibration

This tool is used to correct the distortion in the point cloud caused by the inconsistency between the actual motion direction and the axis direction of the laser profiler.

Rotation Calibration

This tool is used to calibrate the spatial relationship between the rotation axis of the rotating table and the laser profiler reference frame. It is suitable for applications where the target object rotates around a fixed axis and the laser profiler is mounted fixedly.

Dynamic ROI

This tool is used to configure a region of interest (ROI) that dynamically changes along the scanning direction, narrowing the Z-Axis measurement range while ensuring complete coverage of the target contour, thus improving the scan frame rate.

Blind Spot Filtering

This tool identifies and removes false data caused by blind spots, thereby avoiding influence on further data processing.

X-Axis Profile Alignment

This tool corrects the X-axis vibrations in the profiles.

Z-Axis Profile Alignment

This tool corrects the Z-axis vibrations in the profiles.

Is this page helpful?

Leave a feedback

Tool

Is this page helpful?

Thanks for your support!

You can give a feedback in any of the following ways:

We Value Your Privacy