Tool

Measurement Tool

This tool is used to measure the point-to-point distance, point-to-line distance, and height difference in the profile, in order to check if the target object meets the design accuracy requirements.

Encoder and Input Signal Viewer

This tool is used to view the signals input to the laser profiler from the encoder and other external devices, check if the signals are input correctly, and verify the input timing and duration of logic signals, etc.

Custom Reference Frame

This tool is used to define a custom reference frame for display. The depth map and point cloud can be displayed in the custom reference frame.

Encoder Settings

This tool is used to check the encoder value and motion direction, calculate the encoder resolution and obtain the recommended trigger interval. The recommended trigger interval ensures that the Y-axis resolution of the scan data is basically equal to the X-axis resolution.

Height Correction

This tool is used to correct the height error in the profile, which is caused by the rotation of the laser profiler around the X-axis.

Tilt Correction

This tool is used to correct the tilt of the profile, which is caused by the rotation of the laser profiler around the Y-axis.

Blind Spot Filtering

This tool identifies and removes false data caused by blind spots, thereby avoiding influence on further data processing.

X-Axis Profile Alignment

This tool corrects the X-axis vibrations in the profiles.

Z-Axis Profile Alignment

This tool corrects the Z-axis vibrations in the profiles.