UR
This section introduces the Standard Interface communication for UR robots.
The Mech-Mind Vision System seamlessly integrates with UR robots by using Mech-Mind 3D Vision Interface, a URCap plugin that provides out-of-the-box program nodes such as calibration, pick and place. You only need to do some easy drag-and-drop programming to develop vision-guided programs.
Compatibility
The compatible versions of PolyScope and Mech-Mind Software Suite for the URCap 1.5.0 plugins are shown in the table below. Please select the URCap plugin file according to the version of PolyScope used by the robot.
| URcap Plugin File | PolyScope Version | Mech-Mind Software Suite Version | Reference |
|---|---|---|---|
1.5.0.urcap |
e-Series: 5.9 or above (below 6.0) |
1.7.2 or above |
|
CB-Series: 3.14 or above |
|||
1.5.0.urcapx |
e-Series: 6.0 or above |
1.7.2 or above |
|
1.4.6.urcap |
e-Series: 5.3 or above (below 6.0) |
1.6.1 or above |
|
CB-Series: 3.9 or above |
|
Compared with URCap plugin 1.4.6, URCap plugin 1.5.0 has the following new features:
-
Can get the planned path from the “Path Planning” Step in Mech-Vision.
-
Support inputting the project ID, parameter recipe number, branch number, and exit port number by using variables.
-
Support receiving various output results from Mech-Vision, such as Basic (vision points and labels), Custom (vision points, labels, and data output by custom ports), and Planned path (waypoints and labels output by the “Path Planning” Step).