Firmware Upgrade Tool

With this tool, you can upgrade the laser profiler firmware on Ubuntu directly, simplifying the processing of firmware upgrade.

The firmware upgrade tool can be obtained from Mech-Mind Download Center.

The firmware upgrade tool consists of two parts: an executable file named firmware_upgrader and a compressed file named mmind_eye_v2.4.0.

Follow these steps to upgrade the firmware:

  1. Execute the following command to give execute permission to the firmware upgrade tool.

    chmod 777 xxx/firmware_upgrader

  2. Execute the following command to upgrade the firmware.

    sudo xxx/firmware_upgrader xxx/mmind_eye_v2.4.0.zip

    • Enter the path of firmware_upgrader first, followed by the path of mmind_eye_v2.4.0.zip. Otherwise, the firmware upgrade tool cannot be executed.

    • The two paths must be separated by a space. Otherwise, the firmware upgrade tool cannot be executed.

  3. Input the index of the laser profiler whose firmware needs to be upgraded according to the instruction, and press Enter to connect to the laser profiler. The firmware will be automatically upgraded after the laser profiler is connected.

If the firmware upgrade failed, please retry or contact Technical Support.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept