Installation Guide

You are currently viewing the documentation for version 2.5.3. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

General Workflow

Preparation

Select a Version

  • Mech-DLK provides three software versions based on the authorized dongle versions: Mech-DLK Pro-Run, Mech-DLK Pro-Train, and Mech-DLK Standard.

  • The Pro-Run version features Mech-DLK SDK deployment and labeling. The Pro-Train version features Mech-DLK SDK deployment, labeling, module training, validation, and cascading. The Standard version features labeling, model training, and validation. The version features are as follows:

    version features

You can choose the appropriate Mech-DLK version based on your business needs.

System Requirements

It is recommended that the device that runs Mech-DLK should satisfy the following requirements.

Authorized dongle version

Pro-Run

Pro-Train/Standard

Operating system

Windows 10 or above

CPU

Intel® Core™ i7-6700 or above

Memory

8 GB or above

16 GB or above

Graphics card

GeForce GTX 1660 or above

GeForce RTX 3060 or above

Graphics card driver

Version 472.50 or above

  • Mech-DLK does not support AMD CPUs or AMD GPUs.

Graphics Card Specifications

Mech-DLK supports graphics cards of the following specifications:

  • The compute capability must be 6.1 at least.

  • The memory must be 4 GB at least.

View Graphics Card Specifications

  • Click here to view the compute capability of the graphics card on your device.

    installation compute capability

  • Go to the NVIDIA official website to view the memory of the graphics card on your device.

    installation VRAM

Download Mech-DLK Installation Package

You can download the Mech-DLK installation package from Mech-Mind Download Center or contact Mech-Mind pre-sales or support engineers to get the installation package.

Obtain the License Dongle

Please contact Mech-Mind pre-sales to obtain the license dongle.

Mech-DLK features vary based on the dongle versions. Please confirm the version you need.

Install Software

Verify the Integrity of Software Installation Package

Since the software installation package may be corrupted during transmission or downloading, you need to verify the integrity of the software installation package. The integrity of the installation package can be verified with the CRC-32 value, which is provided on the download page.

Please install and use the 7-Zip software to calculate the CRC-32 value.

To verify the integrity of the software installation package, follow these steps:

  1. Copy the installation package to a specified directory on the device that will run the software, such as D:/.

  2. Unzip the installation package. You will see the installer (Mech-DLK Installer 2.5.3.exe) and the content folder.

    Do not move the installer and the content folder.

  3. Open 7-Zip and use the address bar to navigate to the directory where the software installation package is located.

  4. Select the software installation package, and in the menu bar, select File  CRC  CRC-32 to calculate the CRC-32 value.

  5. Check the calculated CRC32 value against the one on the download page. The two values should be identical.

  6. Repeat Steps 3–5 on the installer and the content folder after decompression.

    If the calculated values do not match those provided on the download page, please download the installation package again.

Install Software

If you have installed Mech-DLK (version above 2.3.0), please go see the software upgrading part to upgrade the software.

To install Mech-DLK, follow these steps:

  1. Double-click the executable software installation file and open Mech-DLK Setup Wizard. The Welcome window will be displayed.

  2. In the Welcome window, browse the software information and click Next.

  3. In the License Agreement window, read the license agreement carefully, check the I accept the terms and conditions in the license agreement checkbox, and then click Next.

  4. In the Select Product window, select the product to install (Mech-DLK 2.5.3). If needed, select the Create desktop shortcut(s) checkbox, and then click the Next button.

  5. In the Set Path window, change the installation path as required, such as “D:/project”, and then click the Next button.

    If the installation path is not changed, the path to the default destination folder is as follows: C:/Mech-Mind/Mech-DLK-2.5.3

  6. In the Confirm window, confirm that the installation path is correct and then click the Install button.

  7. In the Install window, wait for the installation to complete.

  8. After the software is installed, in the Finish window, click the Finish button.

If the installation fails, refer to the error message in the Finish window and the Troubleshoot Common Installation Issues section to troubleshoot the issue.

When you first open the software, if your running device displays a security alert, click Allow Access to add the software to the firewall whitelist.

Insert the License Dongle

After software installation, plug the received license dongle into the USB port of your device so that the software can be launched. If the license dongle is plugged out, you will be unable to use the software.

The license dongle contains a license corresponding to the software, and the license will be automatically read once the license dongle is connected to the device.

Try turn your device off and on if the software still cannot be launched, or read the troubleshooting section to get help. If the issue persist, please contact Mech-Mind Technical Support.

Run the Software

Once the software is launched, make sure that CodeMeter is running, namely that in the system tray, the CodeMeter icon codemeter icon is displayed in the Windows tray.

CodeMeter will notify you if your license(s) is about to expire. You can read the software license section to learn how to update your license(s) and check your license(s).

Now, the software is ready for use.

Upgrade Software

  • If the version of Mech-DLK on your device is above 2.3.0, please use the target version of setup wizard to upgrade the software.

  • If the version of Mech-DLK on your device is 2.3.0 or below 2.3.0, please uninstall this version first and then install the new version.

To upgrade the software, follow these steps:

  1. Copy the installation package of the software to a specified directory on your device, such as “D:/project”, and unzip it.

  2. Double-click the executable software installation file and open Mech-DLK Setup Wizard. The Upgrade window will be displayed.

  3. In the Upgrade window, click Upgrade and delete history versions.

  4. Wait until the upgrade operation is completed.

Repair the Software

If Mech-DLK fails to work normally due to certain exception, you can use the repair function to reinstall the software.

To repair the software, follow these steps:

  1. Double-click the software installation file (.exe file) and open Mech-DLK Setup Wizard. The Maintain window will be displayed.

  2. In the Maintain window, click Repair.

  3. Wait until the repair operation is completed.

Modify Installed Components

After installation, you can use the setup wizard to change the installed components of the software. To modify installed components, follow these steps:

  1. Double-click the executable software installation file and open Mech-DLK Setup Wizard. The Maintain window will be displayed.

  2. In the Maintain window, click Modify.

  3. In the Select Product window, select the products or components to install, or clear the products or components to uninstall.

  4. Complete remaining installation operations.

Uninstall the Software

If you do not need to use Mech-DLK, you can uninstall it by using any of the following ways:

  • Uninstall the software by using the Setup Wizard (recommended)

  • Uninstall the software by using Windows Control Panel

Uninstall the Software by Using the Setup Wizard

To uninstall the software by using the Setup Wizard, follow these steps:

  1. Double-click the software installation file (.exe file) and open Mech-DLK Setup Wizard. The Maintain window will be displayed.

  2. In the Maintain window, click the Uninstall button.

  3. In the Uninstall window, click either Keep user configuration files or Do not keep user configuration files.

  4. Wait until the uninstall operation is completed.

Uninstall the Software by Using Windows Control Panel

To uninstall the software by using the Windows Control Panel, follow these steps:

  1. Open the Control Panel on your device.

  2. Select Program  Uninstall or change a program.

  3. Right-click the software to uninstall, and then click Uninstall.

  4. Wait until the uninstall operation is completed.

Software License Agreement

For the license agreement of Mech-DLK, please refer to End-User License Agreement.

Troubleshoot Common Installation Issues

Problem 1: Failed to Start the Setup Wizard

Symptom:

After a double click on the installation file, the setup wizard could not be started properly or crashed.

Possible Cause:

There is not enough space available on the system drive.

Troubleshooting Procedure:

Check whether the available space on the system drive is larger than the size of the installer.

  • If the available space on the system drive is smaller than the size of the installer, free up the space, and then reinstall. If the issue still exists, contact Mech-Mind Technical Support.

  • If there is enough space on the system drive, contact Mech-Mind Technical Support.

Problem 2: Installation Failed

Symptom:

An error message saying “Installation failed.” appeared during the installation.

Possible Cause:

  • Corrupted installer or missing files.

  • The current user does not have administrator access.

  • Another Wizard is performing the installation or the Windows system is being upgraded.

  • Other reasons.

Troubleshooting Procedure:

  1. Obtain a new installer and check its integrity, and then try the installation again.

    • If the issue is resolved, the troubleshooting is completed.

    • Otherwise, proceed to Step 2.

  2. Right-click the installer and select “Run as administrator” to reinstall.

    • If the issue is resolved, the troubleshooting is completed.

    • Otherwise, proceed to Step 3.

  3. Try the installation again after the other Wizard finishes installation or after the Windows system upgrade completes.

    • If the issue is resolved, the troubleshooting is completed.

    • Otherwise, proceed to Step 4.

  4. Restart your computer and try the installation again.

    • If the issue is resolved, the troubleshooting is completed.

    • If the issue still exists, click the “installation log” link in the Finish window to collect installation logs and send them to Mech-Mind Technical Support.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept