Introduction to Labeling Tools

You are currently viewing the documentation for version 2.5.3. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

OK Label

Use the OK Label OK label tool to label an image as OK.

  • Select an image from the image list and then click the OK Label on the toolbar. The image will be labeled as OK.

Defect Labeling Tools

Defect labeling tools can label the defects in images to provide the information required by deep learning training.

You can choose among the following labeling tools built in the software according to actual needs.

Polygon Tool

The Polygon Tool can draw polygon labels with more vertices, which is suitable for regular defects.

tools introduction polygon

  1. Click tools introduction polygon icon (or press P on the keyboard).

  2. Click the first position (vertex) in the selection area, then click the second one, third one, etc., to draw the labels, and right-click to finish.

Brush Tool

Use the Brush Tool to draw labels of any shape. This tool is suitable for defects with complex shapes.

tools introduction pen

  1. Right-click tools introduction polygon icon and then click tools introduction pen icon (or press B on the keyboard).

  2. Adjust the slider to set the thickness of lines according to the size of defects.

  3. Long press the left mouse button in the selection area, move in any direction, and then release the left mouse button to finish the drawing.

Autofill Lasso Tool

Draw arbitrarily shaped labels by forming closed shapes with brush paths. This tool is used for defects with complex shapes.

tools introduction lasso

  1. Right-click tools introduction polygon icon and then click tools introduction lasso icon (or press A on the keyboard).

  2. Long press the left mouse button in the selection area and move in any direction.

Smart Labeling Tool

The Smart Labeling Tool can be used to automatically select the objects in the image.

When multiple objects in an image have large color differences and are scattered, you can use the Smart Labeling Tool to conveniently label the objects in the image.

  1. Click tools introduction samrt labeling icon (or press M on the keyboard).

  2. Move the cursor in the selection region and then click the object to be labeled.

    • If the selection cannot completely cover the object, click the uncovered part to expand the selection area.

    • If the selection covers the areas outside the object, right-click these areas to reduce the selection area.

  3. Click Apply in the upper-left corner of the selection region.

You can use the Select Tool to fine-tune the labeled contour by the following steps:

  1. Use the Select Tool to select the label to be adjusted.

  2. Adjust the contour in one of the following three ways according to actual situation. Please ensure that the selected area closely aligns with the object contour.

    1. Place the mouse cursor on a vertex of the contour. When the cursor turns into tools introduction samrt labeling change2, long-press the left mouse button and drag the vertex to adjust the contour.

    2. Place the mouse cursor on a vertex of the contour. When the cursor turns into tools introduction samrt labeling change2, click the right mouse button to delete the vertex.

    3. Place the mouse cursor on the contour. When the cursor turns into tools introduction samrt labeling change1, click the left mouse button to add a vertex.

When the objects differ greatly in colors and have clear contours, it is recommended that you label multiple objects at a time and click Apply. If the objects are not obviously distinct, it is recommended to label one at a time.

Currently, the Smart Labeling Tool can work in two modes, and it will automatically switch between them according to the actual situation. Users do not need to manually select a mode.

  • Standard mode (GPU): In this mode, the Smart Labeling Tool has robust labeling capabilities. This tool will automatically switch to the standard mode if the running device has a GPU, with available GPU memory of at least 2.5 GB, and there is no project undergoing training or validation.

  • Lite mode (CPU): In this mode, the Smart Labeling Tool has basic labeling capabilities. This tool will automatically switch to the lite mode if the running device has no GPU, or the available GPU memory is less than 2.5 GB, or there is a project undergoing training or validation.

Pre-labeling Tool

After you validate a model, you can use the Pre-labeling Tool to automatically label a single image.

  1. In the labeling toolbar, right-click tools introduction samrt labeling icon, then click tools pre labeling tool icon (or press T on the keyboard) to select the Pre-labeling Tool.

  2. In the upper part of the image, click Start labeling to enable the automatic labeling.

After the labeling process is finished, you can view a yellow triangle in the upper left corner of the sequence number of the image.

Mask Tool

If there are some irrelevant parts that may interfere with model training/inference, you can use the Mask Tool to cover such parts. The masked parts will not be involved in training/inference. For example, the object surface features that should not be judged as defects but are similar to defects, need to be masked out.

You can choose among the following three mask tools built in the software according to actual needs.

  • The Mask Type includes Mask single image and Mask globally.

    • Mask single image: the mask is only valid in the current image.

    • Mask globally: the mask is valid in all images.

  • It is recommended to set a distinct color for the mask.

Mask Polygon Tool

tools introduction mask polygon

  1. Click tools introduction mask polygon icon (or press Shift + P on the keyboard)

  2. Set Mask Type and Mask fill.

  3. Click the first position (vertex) in the selection area, then click the second one, third one, etc., to draw the labels, and right-click to finish.

Mask Brush Tool

tools introduction mask pen

  1. Right-click tools introduction mask polygon icon and then click tools introduction mask pen icon (or press Shift + B on the keyboard)

  2. Set Mask Type, Mask fill, and Brush size.

  3. Long press the left mouse button in the selection area, move in any direction, and then release the left mouse button to finish the drawing.

Mask Lasso Tool

tools introduction mask lasso

  1. Right-click tools introduction mask polygon icon and then click tools introduction mask lasso icon (or press Shift + A on the keyboard)

  2. Set Mask Type and Mask fill.

  3. Long press the left mouse button in the selection area and move in any direction to form closed shapes with the starting point.

Labeling Eraser Tool

The Labeling Eraser Tool can be used to erase the labeled region.

tools introduction eraser

  1. Click tools introduction eraser icon (or press E on the keyboard)

  2. Long press the left mouse button in the selection area and move in any direction.

    Adjust the slider to change the eraser size.

Mask Eraser Tool

The Mask Eraser Tool can be used to erase the masks.

tools introduction mask eraser

  1. Right-click tools introduction eraser icon and then click tools introduction mask eraser icon (or press Shift + E on the keyboard)

  2. Long press the left mouse button in the selection area and move in any direction.

    Adjust the slider to change the eraser size.

Grid Cutting Tool

In industrial inspection scenarios, if the size of images captured by the camera is large, smaller defects may be inconspicuous. If training in such a case is performed, defects are difficult to detect. You can use the Grid Cutting Tool to cut the large images into cell images of the same size according to the set dimension. Defect labeling should be completed for all images before the application of this tool.

  1. Click tools introduction grid cut icon (or press U on the keyboard).

  2. Set Rows and Columns and then click Apply.

    • Place the cursor in the parameter boxes and then scroll the mouse wheel.

    • Enter values in the parameter boxes.

      Note that the number of rows and columns should not be too large, or else the number of cell images after cutting is great, which slows down subsequent inference.

Grid Selection Tool

Right-click tools introduction grid cut icon and then click tools introduction grid select icon (or press I on the keyboard) to open the Grid Selection Tool. By default, the cell images with defect labels are checked, which will be added into the training/validation set. You can select cell images with and without defects on demand. Click the Preview button in the upper right corner of the selected image to preview the cell images.

  • Select defects: Select all the cell images containing defects to put into the training/validation set.

  • Select all: Select all the produced cell images into the training/validation set, and set those containing no defects to OK.

  • Clear selection: Clear the selections on cell images.

ROI Tool

You can use the ROI Tool to set the region of interest.

Setting the ROI can avoid interferences from the background.

  1. Click tools introduction roi icon (or press O on the keyboard).

  2. Adjust the ROI frame in the selection region.

  3. Click the tools introduction OK button in the lower right corner of the ROI to save the setting, or click the tools introduction cancel button to disable the ROI Tool.

  4. Click the Reset button in the upper left corner of the image to reset the ROI.

Select Tool

You can use the Select Tool to scale images.

  1. In the labeling toolbar, click tools introduction select icon (or press S on the keyboard) to select the Select Tool.

  2. Place the cursor in the labeling area of the image and use the mouse wheel to scroll forward to zoom in and scroll backward to zoom out.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept