YASKAWA Basic Operation
This topic introduces some basic operations of YASKAWA robots.
Set Tool at the Vision Point
In this example, Tool No.1 is set for P071 Position Register.
| The pose data of Tool 0 must be all 0. Namely, Tool 0 has a flange pose. Do not change the pose data of Tool 0. |
-
In the teach mode, select a program and then select .
-
In the POSITION VARIABLE interface, select PAGE.
-
On the pop-up keyboard, select Dec, input 71 (indicating P071 Position Register), and select Enter.
-
Select the blank box next to #P071 to choose the reference frame. Select ROBOT in the drop-down menu.
-
Select TOOL. Input 1 (indicating using tool No.1) with the pop-up keyboard. Select Enter.
When the configuration is done, the interface is as follows.
