Flash Drive cannot be Recognized by the Teach Pendant?

You are currently viewing the documentation for the latest version (2.1.2). To access a different version, click the "Switch version" button located in the upper-right corner of the page.

■ If you are not sure which version of the product you are currently using, please feel free to contact Mech-Mind Technical Support.

Resolve the issue based on specific cause in the following table.

Cause	Troubleshooting
Flash drive is corrupted.	Plug the flash drive into another PC. If the flash drive cannot be recognized, the flash drive is corrupted. Use another one.
The file system of the flash drive is not supported by the robot system.	Read the official documents of the robot to make sure that the file system of the flash drive is supported by the robot system.
USB port of the teach pendent is damaged.	If the robot system provides multiple USB ports, try another port. If the robot brand provides simulation software, try using the simulation software to load the programs to the robot system.

Cause

Troubleshooting

Flash drive is corrupted.

Plug the flash drive into another PC. If the flash drive cannot be recognized, the flash drive is corrupted. Use another one.

The file system of the flash drive is not supported by the robot system.

Read the official documents of the robot to make sure that the file system of the flash drive is supported by the robot system.

USB port of the teach pendent is damaged.

If the robot system provides multiple USB ports, try another port. If the robot brand provides simulation software, try using the simulation software to load the programs to the robot system.

Is this page helpful?

Leave a feedback

Flash Drive cannot be Recognized by the Teach Pendant?

Is this page helpful?

Thanks for your support!

You can give a feedback in any of the following ways:

We Value Your Privacy