Robot Collisions

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

This section introduces issues related to robot collisions and provides solutions.

When a robot collision occurs, the following issues may arise:

  • Gripper Collides with Target Object

  • Robot Body Collides with Bin

  • Robot Body Collides with Bin

  • Robot Body or Gripper Collides with Scene Object

  • Held Target Object Collides with Scene Object or Other Target Objects

Please troubleshoot based on the specific symptoms of the issue.

The following sections on collision detection configuration will use Mech-Viz for explanation.

Gripper Collides with Target Object

Symptom:

The path planning is successful, but there is a collision between the gripper and the target object.

Solution:

Please address the issue by the following steps:

  1. In the Collision detection configuration window, enable Detect collision between point cloud and others.

  2. In the Tool Configuration area, decrease Collision volume upper limit.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.