Regular Cleaning and Maintenance

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

To ensure proper equipment operation, prevent accidents, and minimize downtime, relevant personnel should regularly perform routine cleaning and maintenance of the 3D camera lens.

image

The camera lens needs to be kept clean, free of dust, scratches, smudges, water mist, or water marks. The inspection frequency can be adjusted based on the production environment, humidity, and lens orientation. A daily inspection is recommended.

Cleaning Method:

When cleaning the surface of the camera, please blow off the dust gently, and then use a clean soft cloth to gently wipe the surface. When cleaning the camera lenses, a liquid lens cleaner and clean lint-free cloth can be used to carefully wipe the lenses to avoid scratching.

  • Do not clean the camera with corrosive or volatile solvents such as alcohol, gasoline and kerosene. These substances may damage the exterior and internal structure of the camera.

  • When reactivating a camera that has been unused for an extended period, it is necessary to thoroughly clean the camera lens and housing first.

  • Do not use a pressure washer gun or hose to spray and wash the product. Water entering the camera may lead to malfunction, fire, or even explosion. Water or other liquid damage to the camera is not covered by the warranty.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept