Regular Cleaning and Maintenance

You are currently viewing the documentation for version 2.0.0. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

To ensure proper equipment operation, prevent accidents, and minimize downtime, relevant personnel should regularly perform routine cleaning and maintenance of the 3D camera lens.

The camera lens needs to be kept clean, free of dust, scratches, smudges, water mist, or water marks. The cleaning frequency can be adjusted based on the production environment, humidity, and lens orientation. A daily cleaning is recommended.

Cleaning Method:

Disconnect the 3D camera from power before cleaning. When cleaning the surface of the product, please use a clean soft cloth to gently wipe off the dust and debris. When cleaning the windows, to avoid scratching, you can use a clean, soft lint-free cloth with lens cleaner or glass cleaner to carefully wipe the windows.

If the 3D camera is not disconnected from power during cleaning, electrical shock hazard may be present.
It is recommended to use wet wipes or cleaners with isopropanol as the main active ingredient. Do not use gasoline, kerosene, or other corrosive substances. These substances may damage the exterior and internal structure of the product.
Do not use a pressure washer gun or hose to spray and wash the product. Water entering the camera may lead to malfunction, fire, or even explosion. Water or other liquid damage to the camera is not covered by the warranty.
When reactivating a camera that has been unused for an extended period, it is necessary to thoroughly clean the camera lens and housing first.

Regular Cleaning and Maintenance

We Value Your Privacy