User Interface

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

When you open Mech-Eye Viewer, the following interface is displayed.

device finder main

In this interface, you can view all the available cameras and their information, set camera IP address and connect to a camera.

Click path to view troubleshooting guidance on camera connection issues.

After the camera is successfully connected, the following interface is displayed.

main view

This interface consists of the following parts:

  1. Menu bar: save raw data, start virtual camera, open built-in tools, check software information, etc.

  2. Data acquisition area: disconnect from the camera, obtain and save data, and view the camera log.

  3. Data display area: display the 2D image, depth map, and point cloud obtained from the camera.

  4. Parameter panel: view and adjust parameters, and save parameter groups for different purposes.

  5. Status bar: display software status information. Click Previous or Next to switch between messages.

Menu Bar

The menu bar provides the File, Tools, View, Help and user switch menus.

Menu Option Description

File

Save Raw Data of Camera

Save the raw data in MRAW format for troubleshooting and analysis.

Start Virtual Camera

Load saved raw data and view the parameter values set when the data was saved.

Tools

Provide supplementary tools. For detailed information, please refer to Tools.

View

Toolbar

Check to display the toolbar. Unchecked by default.

Image Information Box

Check to display the image information box on the 2D image and depth map. Checked by default.

Point Cloud Exhibit Button

Check to display the Play button on the point cloud. Unchecked by default.

Parameter Description

Check to display the Parameter Description section in the parameter panel. Checked by default.

Help

About

Display software version.

What’s New

Open the Mech-Eye SDK release notes.

User Manual

Open the user manual in your browser.

Options

Switch the software display language. Change is applied after the software is restarted.

user type

Click to switch user account. The default account is Standard. The other accounts require passwords. If needed, please contact Technical Support.

Data Acquisition Area

In the data acquisition area, you can:

Data Display Area

This area displays the data output from the camera. You can switch among 2D image, depth map and point cloud.

For detailed information on the function of this area, please refer to Adjust Data Display.

Parameter Panel

The parameter panel consists of the following sections:

camera parameters

This topic introduced the user interface of Mech-Eye Viewer. Continue reading for instructions on using Mech-Eye Viewer.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.