Camera Firmware Upgrade

You are currently viewing the documentation for version 2.1.0. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

The version of the camera firmware must be consistent with that of Mech-Eye Viewer for the camera to be connected in Mech-Eye Viewer. Follow these steps to upgrade the camera firmware.

camera upgrade interface

  1. Click Tool  Camera Firmware Upgrade to open Camera Firmware Upgrade.

  2. (Optional): Select the firmware upgrade file: Usually, the file does not to be selected manually. For special situations, click … to the right of Select Firmware to select the firmware upgrade file.

  3. Click Upgrade Firmware, and then click Yes in the pop-up window to upgrade the firmware.

  4. Click Yes in the pop-up window to restart the camera.

    The camera restart may take several minutes. Please wait until it completes. Click icon refresh in the upper left to update the list.

  5. When the camera shows up in the list, and the firmware version displayed in its info card is the latest version, firmware upgrade is completed.

  6. Click Connect to connect to this camera.

If the upgrade failed, please retry. If the upgrade still fails, please contact Technical Support.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept