Acquire High-Quality Data

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

In this phase, you need to adjust the parameters of the laser profiler to ensure that you can acquire high-quality data (intensity images, depth maps, and point clouds).

The general workflow of adjusting parameters is as follows:

  1. Create or select a parameter group.

    After setting the parameter group here, you should select this parameter group when connecting to the laser profiler in the “3D Laser Profiler” Step of the Mech-MSR project.

  2. Adjust the parameters in the profile mode to obtain the satisfactory profile.

  3. Adjust the parameters in the scan mode to obtain the satisfactory intensity image, depth map, and point cloud.

  4. Save parameter adjustments to the parameter group.

For more details, refer to General Workflow of Adjusting Parameters.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept