Mech-Eye SDK 2.3.2 Release Notes
Mech-Eye Viewer
Adjust Virtual Device Parameters
In Mech-Eye Viewer 2.3.2, you can adjust the Y-Axis Resolution parameter in a virtual device.
Resolved Issues
The following issues have been resolved in Mech-Eye SDK 2.3.2:
-
If the software + fixed rate trigger method was used in the scan mode to acquire data, occasionally the acquisition failed.
-
If the Line Scan Trigger Source parameter was set to Encoder and acquisition was started when no encoder was connected, after the acquisition was stopped manually, the software interface was frozen until the time set in the Timeout Period parameter had passed.
-
With a resolution of 1980 × 1080 and scaling of 125%, the software interface could not be fully displayed on the screen when the restore button was clicked after the software interface had been maximized.
-
With a resolution of 1280 × 800 and scaling of 100%, the Measurement Tool window could not be fully displayed on the screen.
Mech-Eye API
Resolved Issues
The following issues have been resolved in Mech-Eye SDK 2.3.2:
-
When multiple clients were used at the same time (including Mech-Vision), if the laser profiler had started acquiring data according to the command of one client, another client could not successfully register a callback function. After the laser profiler had stopped acquiring data, the latter client could successfully register the callback function but could not retrieve the acquired data.
-
If the LineScanTriggerSource parameter was set to Encoder and acquisition was started when no encoder was connected, after the
StopAcquisition()method had been called, the client program was frozen until the time set in the TimeoutPeriod parameter had passed. -
If the software + fixed rate trigger method was used in the scan mode to acquire data, occasionally the acquisition failed.
-
When VisionPro samples were used to acquire data, some of the depth data were deleted because the Z-axis measurement range used by the samples to calculate the Z-axis resolution was inconsistent with the actual Z-axis measurement range.
GenICam Interface
Resolved Issues
The following issues have been resolved in Mech-Eye SDK 2.3.2:
-
If the software + fixed rate trigger method was used in the scan mode to acquire data, occasionally the acquisition failed.
-
When the value of Height (Scan Line Count) set in HALCON exceeded 3400, the error message Image acquisition: timeout (error code: 5322) prompted.
-
The point cloud obtained through HALCON was distorted and inconsistent with that obtained through Mech-Eye Viewer.