Merge Point Clouds with Similar Heights
Usage Scenario
This Step merges a list of point clouds belonging to the same object. This Step can be used after the Point Cloud Clustering Step.
Parameter Description
Calc Height Settings
| Parameter | Description |
|---|---|
Tolerance in Height |
Parameter description: Set the tolerance range for determining whether two point clouds have similar height values, measured in millimeters (mm).
|
Reference Direction Type |
Parameter description: Set the reference direction type for height calculation. Value list:
Instruction: Select the source of the reference direction according to actual requirements. |
Customized Direction
| Parameter | Description |
|---|---|
X |
Parameter description: Set the component of the custom reference direction on the X-axis.
|
Y |
Parameter description: Set the component of the custom reference direction on the Y-axis.
|
Z |
Parameter description: Set the component of the custom reference direction on the Z-axis.
|
Direction for Calc Point Cloud Height
| Parameter | Description |
|---|---|
Positive/negative direction along Z-axis of the normal |
Description: This parameter is used to set whether to calculate the height of the point cloud along the positive or negative direction of the normal of the maximum point cloud. Value list:
Instruction: This parameter needs to be set when Reference Direction Type is set to NormalDirOfMaxSizeCloud. |