Visualize Depth in Range
Function
This Step converts the depth map in the ROI to a color image, with different depth values corresponding to different color pixel values.
Usage Scenario
This Step is usually used in measurement scenarios to convert depth maps into color images for subsequent measurement or display.
Parameter Description
| Parameter | Description |
|---|---|
ROI |
Parameter description: Set the region of interest (ROI) for depth visualization. Only depth values within the ROI will be visualized. |
Visualization Setting Type |
Parameter description: Set the visualization method for depth to color conversion.
|
Vis Depth Range |
Parameter description: This parameter is used to set the range for depth to color conversion.
|
Clipping Maximum |
Parameter description: Set the maximum depth for visualization, measured in millimeters (mm).
|
Clipping Minimum |
Parameter description: Set the minimum depth for visualization, measured in millimeters (mm).
|
Max Depth Value |
Parameter description: Set the maximum depth for visualization, measured in millimeters (mm). This parameter should be set when Visualization Type is set to Manual range.
|
Min Depth Value |
Parameter description: Set the minimum depth for visualization, measured in millimeters (mm). This parameter should be set when Visualization Type is set to Manual range.
|
To Gray |
Parameter description: Control whether to output the visualized depth map as a grayscale image.
|