Mech-Eye SDK 2.5.1 Release Notes
This topic introduces the new features, improvements, and resolved issues of Mech-Eye SDK 2.5.1.
Mech-Eye Viewer
LSR S-GL, LSR L-GL, and LSR XL-GL: Improved the Performance of Reflective Fringe Coding Mode + More Complete Processing Mode
After the firmware of LSR S-GL, LSR L-GL, and LSR XL-GL is upgraded to 2.5.1, when acquiring data with the Reflective fringe coding mode + More complete processing mode, point cloud data loss due to the height differences on the target object surface has been reduced:
2.5.0 | 2.5.1 |
---|---|
PRO S-GL and PRO M-GL: Improved the Performance of Reflective Fringe Coding Mode + More Complete Processing Mode
After the firmware of PRO S-GL and PRO M-GL is upgraded to 2.5.1, when acquiring data with the Reflective fringe coding mode + More complete processing mode, point cloud data loss due to the height differences on the target object surface has been reduced.
Mech-Eye API
LSR S-GL, LSR L-GL, and LSR XL-GL: Improved the Performance of Reflective Fringe Coding Mode + MoreComplete Processing Mode
After the firmware of LSR S-GL, LSR L-GL, and LSR XL-GL is upgraded to 2.5.1, when acquiring data with the LaserFringeCodingMode (Fringe Coding Mode) parameter set to Reflective and LaserProcessingMode (Processing Mode) parameter set to MoreComplete, point cloud data loss due to the height differences on the target object surface has been reduced:
2.5.0 | 2.5.1 |
---|---|
PRO S-GL and PRO M-GL: Improved the Performance of Reflective Fringe Coding Mode + MoreComplete Processing Mode
After the firmware of PRO S-GL and PRO M-GL is upgraded to 2.5.1, when acquiring data with the ProjectorFringeCodingMode (Fringe Coding Mode) parameter set to Reflective and ProjectorProcessingMode (Processing Mode) parameter set to MoreComplete, point cloud data loss due to the height differences on the target object surface has been reduced.
GenICam Interface
LSR S-GL, LSR L-GL, and LSR XL-GL: Improved the Performance of Reflective Fringe Coding Mode + MoreComplete Processing Mode
After the firmware of LSR S-GL, LSR L-GL, and LSR XL-GL is upgraded to 2.5.1, when acquiring data with the LaserFringeCodingMode (Fringe Coding Mode) parameter set to Reflective and LaserProcessingMode (Processing Mode) parameter set to MoreComplete, point cloud data loss due to the height differences on the target object surface has been reduced:
2.5.0 | 2.5.1 |
---|---|
PRO S-GL and PRO M-GL: Improved the Performance of Reflective Fringe Coding Mode + MoreComplete Processing Mode
After the firmware of PRO S-GL and PRO M-GL is upgraded to 2.5.1, when acquiring data with the ProjectorFringeCodingMode (Fringe Coding Mode) parameter set to Reflective and ProjectorProcessingMode (Processing Mode) parameter set to MoreComplete, point cloud data loss due to the height differences on the target object surface has been reduced.