3D Camera Model Selection and Mounting

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

This section will introduce the camera selection method and mounting modes during the hardware installation process.

Select Camera Model

In actual applications of neatly arranged cylindrical shaft loading, the following three cameras are usually used.

  • Mech-Eye LSR L industrial 3D camera with high accuracy, large field of view, and high resistance to ambient light.

  • Mech-Eye PRO S industrial 3D camera with high accuracy, fast speed, high resistance to ambient light, and capability to function in medium-distance.

  • Mech-Eye PRO M industrial 3D camera with high accuracy, fast speed, high resistance to ambient light, and capability to function in medium-distance.

For detailed technical specifications of the above cameras, please refer to PRO S / PRO M Technical Specifications and LSR L Technical Specifications .

Camera Mounting Mode

Classification of Mounting Mode

There are two common camera mounting modes: Eye in Hand (EIH) and Eye to Hand (ETH), as shown in the left and right figures below respectively.

installation method classification

The characteristics and advantages of the two camera mounting modes are shown in the table below.

Mounting mode Characteristics Advantages

Eye in Hand

The camera is mounted on the robot tool.

  • The camera is mounted on the robot tool and can move with the robot, allowing it to capture images from multiple perspectives and positions.

  • The image-capturing position can be adjusted to adapt to incoming workpieces of different heights.

Eye to Hand

The camera is fixedly mounted on the camera stand.

  • Have a bigger field of view.

  • The robot does not need to wait for the camera to capture images before picking, which can improve production efficiency.

Precautions

For shaft picking projects, you need to pay attention to the following issues before mounting the camera.

  • In order to improve the point cloud quality of the reflective shaft, when mounting the camera, the structured line from the laser profiler better be perpendicular to the axis of the shaft. As shown in the figure below, 1 is the axis shaft and 2 is the structured line.

    pay attention 1
  • The infeed shafts can be placed in two positions: vertical and horizontal. In order to improve the point cloud quality of the shafts, two cameras can be mounted, as shown in the figure below.

    pay attention 2

Camera Mounting Height

When determining the camera mounting height, you can use the Mech-EyeIndustrial 3D Camera FOV Calculator , and obtain the height of the bin (or the possible extreme height of the workpiece) and the possible maximum height of the workstation in advance. Follow the steps below.

  1. Calculate the camera’s field of view at the top of the stack.

    The camera’s field of view should completely cover the upper surface of the top-layer shafts, and a margin of 150–200 mm should be left on each side of the field of view at the top of the bin to deal with the deviation of the incoming workpieces, as shown in the figure below.

    camera installation hight signal
  2. Use the Mech-Eye Industrial 3D Camera FOV Calculator to calculate the working distance.

    In the Mech-Eye Industrial 3D Camera FOV Calculator, select a proper camera model, then continuously adjust the value of the “Enter working distance” parameter until the calculation result is greater than the previously calculated camera’s field of view at the top of the bin. For detailed instructions on how to use the FOV calculator, please refer toIndustrial 3D Camera FOV Calculator.

  3. Calculate the camera mounting height.

    As shown in the figure below, camera mounting height = working distance (WD) + stack height (H).

    calc installation hight

    To ensure that the point cloud collected by the camera is of good quality, the camera mounting height should be less than the maximum working distance of the selected camera.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.