Garbled Characters in Chinese Log Files

You are currently viewing the documentation for version 1.7.5. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

Symptom:

The messages of Mech-Vision log files contained garbled characters (???) when the following conditions were met:

Chinese simplified was set as software language. (Select Settings Option Option language)
On the IPC, the Current system locale was not set as Chinese (Simplified, PRC), but as others (e.g. English, United States). (Select Control panel Clock and Region Region Administrative Change system locale)

Affected Software Versions:

All versions

Possible Cause:

Current system locale setting and software language setting did not match.

Solution:

Upgrade Mech-Vision to version 1.7.0 or later.
If Mech-Vision cannot be upgraded to version 1.7.0 or later currently, follow these steps to workaround this issue:
- Go to Control panel Clock and Region Region Administrative Change system locale and change the Current system locale to Chinese (Simplified, PRC).
- Restart the IPC for this change to take effect.
  
  After the restart, the newly generated logs will display normally in the log files.
  
  After the restart, garbled characters will remain in the logs that are generated before the setting change.

Garbled Characters in Chinese Log Files

We Value Your Privacy