Firmware Upgrade Tool

You are currently viewing the documentation for version 2.3.3. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

With this tool, you can upgrade the camera firmware on Ubuntu directly, simplifying the processing of firmware upgrade.

The firmware upgrade tool can be obtained from Mech-Mind Download Center.

The firmware upgrade tool consists of two parts: an executable file named firmware_upgrader and a compressed file named mmind_eye_v2.3.3.

Follow these steps to upgrade the firmware:

  1. Execute the following command to give execute permission to the firmware upgrade tool.

    chmod 777 xxx/firmware_upgrader

  2. Execute the following command to upgrade the firmware.

    sudo xxx/firmware_upgrader xxx/mmind_eye_v2.3.3.zip

    • Enter the path of firmware_upgrader first, followed by the path of mmind_eye_v2.3.3.zip. Otherwise, the firmware upgrade tool cannot be executed.

    • The two paths must be separated by a space. Otherwise, the firmware upgrade tool cannot be executed.

  3. Input the index of the camera whose firmware needs to be upgraded according to the instruction, and press Enter to connect to the camera. The firmware will be automatically upgraded after the camera is connected.

If the firmware upgrade failed, please retry or contact Technical Support.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept