Mech-Eye SDK Installation Guide (Ubuntu)

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

This topic guides you through the downloading, installation, upgrade, and uninstallation of Mech-Eye SDK on Ubuntu.

If you are using the Windows operating system, please refer to Mech-Eye SDK Installation Guide.

Download Mech-Eye SDK

Mech-Eye SDK installation packages for the AMD64 and ARM64 architectures are provided. Please download the corresponding Mech-Eye SDK installation package according to your needs.

  • Use the arch command to check the system architecture.

  • The downloaded installation package is a compressed file (.zip).

Verify the Integrity of Mech-Eye SDK Installation Package

Since the Mech-Eye SDK installation package may be corrupted during transmission or downloading, you need to verify the integrity of the installation package. The integrity of the installation package can be verified with the CRC-32 value, which is provided on the download page.

Please install and use libarchive-tools to calculate the CRC-32 value:

sudo apt-get install libarchive-tools

To verify the integrity of the software installation package, follow these steps:

  1. Execute the following command to calculate the CRC-32 value of the compressed file:

    • If the system architecture is AMD64, execute the following command:

      crc32 Mech-Eye_API_2.3.0_amd64.zip
    • If the system architecture is ARM64, execute the following command:

      crc32 Mech-Eye_API_2.3.0_arm64.zip
  2. Check the calculated CRC-32 value against the one on the download page. The two values should be identical.

  3. Decompress the compressed file. After decompression, you will obtain the software installer in the DEB format (.deb).

  4. Execute the following command to calculate the CRC-32 value of the software installer:

    • If the system architecture is AMD64, execute the following command:

      crc32 Mech-Eye_API_2.3.0_amd64.deb
    • If the system architecture is ARM64, execute the following command:

      crc32 Mech-Eye_API_2.3.0_arm64.deb
  5. Check the calculated CRC-32 value against the one on the download page. The two values should be identical.

If the calculated values do not match those provided on the download page, please download the installation package again.

Install Mech-Eye SDK

If you have installed Mech-Eye SDK already, please upgrade Mech-Eye SDK instead.

Follow these steps to install Mech-Eye SDK on Ubuntu:

  1. Enter the path where the installation package is stored and execute the following command to install Mech-Eye SDK:

    • If the system architecture is AMD64, execute the following command:

      sudo dpkg -i 'Mech-Eye_API_2.3.0_amd64.deb'
    • If the system architecture is ARM64, execute the following command:

      sudo dpkg -i 'Mech-Eye_API_2.3.0_arm64.deb'
  2. Execute the following command to check if the installation succeeded. If the Mech-Eye SDK version is printed, the installation succeeded.

    dpkg -l | grep mecheyeapi

Upgrade Mech-Eye SDK

If you have installed Mech-Eye SDK already, follow these steps to upgrade Mech-Eye SDK:

  1. Execute the following command to check if Mech-Eye SDK has been installed:

    dpkg -l | grep mecheyeapi
  2. Execute the following command to uninstall Mech-Eye SDK:

    sudo dpkg -P mecheyeapi
  3. Enter the path where the installation package is stored and execute the following command to install Mech-Eye SDK:

    • If the system architecture is AMD64, execute the following command:

      sudo dpkg -i 'Mech-Eye_API_2.3.0_amd64.deb'
    • If the system architecture is ARM64, execute the following command:

      sudo dpkg -i 'Mech-Eye_API_2.3.0_arm64.deb'
  4. Execute the following command to check if the installation succeeded. If the Mech-Eye SDK version is printed, the installation succeeded.

    dpkg -l | grep mecheyeapi

Uninstall Mech-Eye SDK

Follow these steps to uninstall Mech-Eye SDK:

  1. Execute the following command to uninstall Mech-Eye SDK:

    sudo dpkg -P mecheyeapi
  2. Execute the following command to check if the uninstallation succeeded. If no messages are printed, the uninstallation succeeded.

    dpkg -l | grep mecheyeapi

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.