LSR S
Technical Specifications
Product name |
Mech-Eye Industrial 3D Camera |
|
|---|---|---|
Model |
LSR S |
|
Object focal distance(1) |
800 mm |
1400 mm |
Recommended working distance |
500–900 mm |
900–1500 mm |
FOV (near) |
480 × 360 mm @ 0.5 m |
|
FOV (far) |
1500 × 1200 mm @ 1.5 m |
|
Depth map resolution |
2048 × 1536 |
|
RGB resolution |
4000 × 3000 / 2000 × 1500 |
|
Point Z-value repeatability (σ)(2) |
0.2 mm @ 1.5 m |
|
Measurement accuracy (VDI/VDE)(3) |
1.0 mm @ 1.5 m |
|
Weight(4) |
1.9 kg |
|
Baseline |
140 mm |
|
Dimensions(4) |
228 × 77 × 126 mm |
|
Typical capture time |
0.5–0.9 s |
|
Light source |
Red laser (638 nm, Class 2) |
|
Operating temperature(5) |
-10–45°C |
|
Communication interface |
Gigabit Ethernet |
|
Input |
24 VDC, 3.75 A |
|
Safety and EMC |
CE/FCC/VCCI/KC/ISED/NRTL |
|
IP rating(6) |
IP67 |
|
Cooling |
Passive |
|
(1) The camera is available in two object focal distances, each corresponding to a different range of recommended working distance.
(2) One standard deviation of 100 Z-value measurements of the same point. The measurement target was a ceramic plate.
(3) According to VDI/VDE 2634 Part II.
(4) Excluding the heat-dissipation panel and camera bracket.
(5) The operating temperature of the camera without the heat-dissipation panel.
(6) Test implemented based on IEC 60529. 6: dust-tight; 5: protected against water jets.
CE
Hereby [Mech-Mind Robotics Technologies Ltd.] declares that [LSR S] is in compliance with the Electromagnetic Compatibility Directive 2014/30/EU.
The full text of the EU Declaration of Conformity is available at https://downloads.mech-mind.com/?tab=tab-eu-dec