PRO XS

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

Technical Specifications

Product name

Mech-Eye Industrial 3D Camera

Model

PRO XS

Object focal distance(1)

350 mm

550 mm

Recommended working distance

300–450 mm

450–600 mm

FOV (near)

220 × 160mm @ 0.3m

FOV (far)

430 × 320mm @ 0.6m

Resolution

1440 × 1080

Pixels

1.6 MP

Point Z-value repeatability (σ)(2)

0.1 mm @ 0.5 m

Measurement accuracy (VDI/VDE)(3)

0.1 mm @ 0.5 m

Weight

0.8 kg

Baseline

93 mm

Dimensions

160 × 52 × 87 mm

Typical capture time

0.7–1.1 s

2D image color

Monochrome

Light source

Blue LED (459 nm, RG2)

Operating temperature

0–45°C

Communication interface

Gigabit Ethernet

Input

24 VDC, 1.5 A

Safety and EMC

CE/FCC/VCCI/KC/ISED/NRTL

IP rating(4)

IP65

Cooling

Passive

(1) The camera is available in two object focal distances, each corresponding to a different range of recommended working distance.

(2) One standard deviation of 100 Z-value measurements of the same point. The measurement target was a ceramic plate.

(3) According to VDI/VDE 2634 Part II.

(4) Test implemented based on IEC 60529. 6: dust-tight; 5: protected against water jets.

Spatial Resolution

spatial resolution pro xs

Point Z-Value Repeatability

point z value repeatability pro xs

Dimensions

Unit: mm

dimensions pro xs

CE

Hereby [Mech-Mind Robotics Technologies Ltd.] declares that [PRO XS] is in compliance with the Electromagnetic Compatibility Directive 2014/30/EU.

The full text of the EU Declaration of Conformity is available at https://downloads.mech-mind.com/?tab=tab-eu-dec

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.