Camera Parameters Supported for GenICam

You are currently viewing the documentation for version 2.2.2. To access documentation for other versions, click the "Switch Version" button located in the upper-right corner of the page.

■ To use the latest version, visit the Mech-Mind Download Center to download it.

■ If you're unsure about the version of the product you are using, please contact Mech-Mind Technical Support for assistance.

This topic describes the camera parameters provided by the camera for GenICam, which indicates the features and functions provided by the camera.

Correspondence Between Camera Parameters in GenICam Client and Mech-Eye Viewer

Camera parameters supported for GenICam generally correspond with those provided in Mech-Eye Viewer. Mech-Eye Viewer provides more detailed information such as parameter descriptions and parameter values, which can be helpful for adjusting parameters in GenICam clients.

The following table provides the correspondence between camera parameters in GenICam clients and Mech-Eye Viewer:

Parameter in GenICam Client Parameter in Mech-Eye Viewer Visibility Notes

Scan2DROIHeight

2D Parameters

  • Auto-Exposure ROI

Beginner

Scan2DROILeft

Scan2DROITop

Scan2DROIWidth

Scan2DExposureMode

2D Parameters

  • Exposure Mode

  • 2D Image (Texture) Exposure Mode

Beginner

Scan2DExposureTime

2D Parameters

  • Exposure Time

Beginner

Scan2DExpectedGrayValue

2D Parameters

  • Gray Value

Beginner

Scan2DHDRExposureSequence

2D Parameters

  • Exposure Sequence

Beginner

Scan2DToneMappingEnable

2D Parameters

  • Tone Mapping

Beginner

Scan2DSharpenFactor

2D Parameters

  • Sharpen Factor

Guru

Scan2DPatternRoleExposureMode

2D Parameters

  • 2D Image (Depth Source) Exposure Mode

Beginner

LSR L (V4)
DEEP (V4)

Scan2DPatternRoleExposureTime

2D Parameters

  • 2D Image (Depth Source) Exposure Time

Beginner

Scan3DROIHeight

ROI

Beginner

Scan3DROILeft

Scan3DROITop

Scan3DROIWidth

.

ProjectorLightColor

3D Parameters

  • Projector

    • Light Color

Guru

Pro M Enhanced (V3)

Pro S Enhanced (V3)

Log M (V3)

Log S (V3)

ProjectorPowerLevel

3D Parameters

  • Projector

    • Light Brightness

Expert

DLP cameras

ProjectorFringeCodingMode

3D Parameters

  • Projector

    • Fringe Coding Mode

Expert

Nano (V3)

Pro XS (V3)

PRO M and PRO S (V4)

UHP-140

AntiFlickerMode

3D Parameters

  • Projector

    • Anti-Flicker Mode

Expert

PRO M and PRO S (V4)

NANO (V4)

ProjectorSelectionMode

3D Parameters

  • Projector

    • Projector Selection Mode

Guru

Deep (V3)

Pro L Enhanced (V3)

ProjectorSelector

3D Parameters

  • Projector

    • Projector Selector

Guru

LaserFringeCodingMode

3D Parameters

  • Laser

    • Fringe Coding Mode

Expert

Laser L (V3)

Laser L Enhanced (V3)

LSR L (V4)

DEEP (V4)

LaserPowerLevel

3D Parameters

  • Laser

    • Laser Power

Expert

LaserFrameAmplitude

3D Parameters

  • Laser Projection Frame Control

    • Laser Frame Amplitude

Guru

LaserFrameOffset

3D Parameters

  • Laser Projection Frame Control

    • Laser Frame Offset

Guru

LaserFramePartitionCount

3D Parameters

  • Laser Projection Frame Control

    • Laser Frame Partition Count

Guru

Scan3DBinningEnable

3D Parameters

  • 3D Binning

Guru

Pro L Enhanced (V3)

Laser L Enhanced (V3)

Scan3DExposureCount

3D Parameters

  • Exposure Multiplier

Beginner

Scan3DExposureTime

3D Parameters

  • Exposure Time

Beginner

Scan3DExposureTime2

3D Parameters

  • Exposure Time 2

Beginner

Scan3DExposureTime3

3D Parameters

  • Exposure Time 3

Beginner

Scan3DGain

3D Parameters

  • Gain

Expert

UhpCaptureMode

3D Parameters

  • UHP

    • Capture Mode

Beginner

UHP-140

AcquisitionMode

single cap and continuous cap

-

DepthLowerLimit

Depth Range

Beginner

DepthUpperLimit

DeviceScanType

-

-

PointCloudSurfaceSmoothing

Point Cloud Processing

  • Surface Smoothing

Beginner

Available for camera firmware 2.1.0 and above

PointCloudOutlierRemoval

Point Cloud Processing

  • Outlier Removal

Beginner

PointCloudNoiseRemoval

Point Cloud Processing

  • Noise Removal

Expert

PointCloudEdgePreservation

Point Cloud Processing

  • Edge Preservation

Guru

CloudOutlierFilterMode

Point Cloud Processing

  • Noise Removal

Beginner

Available for camera firmware 2.0.2 and below

CloudSmoothMode

Point Cloud Processing

  • Point Cloud Smoothing

Beginner

FringeContrastThreshold

Point Cloud Processing

  • Stripe Contrast Threshold

Beginner

FringeMinThreshold

Point Cloud Processing

  • Minimum Fringe Intensity Threshold

Guru

UserSetDefault

-

-

UserSetSelector

Parameter Group drop-down menu

-

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.