Generate Point Cloud Model by Importing CAD File + Add Pick Point by Adding a Pose

You are viewing an old version of the documentation. You can switch to the documentation of the latest version by clicking the top-right corner of the page.

Generate Point Cloud Model by Importing CAD File

If you already have the CAD model file of the target object, you can import this file into Matching Model and Pick Point Editor, and generate a point cloud model from the CAD file. Currently, only CAD model file in STL format is supported.

Preparation

  1. Prepare the CAD model file of the target object in STL format.

  2. Open Matching Model and Pick Point Editor.

    1. Start Mech-Vision.

    2. Open an existing project or create a new blank project, ensuring it includes the “Capture Images from Camera” Step. If this step is not present, please add it.

    3. Click Matching Model and Pick Point Editor on the toolbar.

Workflow

  1. Click Import CAD file in the initial interface of the tool.

  2. Find the desired CAD file, select and open it.

  3. Select the measurement unit of the CAD model in the pop-up window.

  4. The imported CAD file will show up in the CAD files list on the left.

  5. After selecting the file in the CAD files list, click model cloud generate cad 1 or model cloud generate cad 2 in the toolbar to generate the point cloud model.

    1. model cloud generate cad 1: generate a point cloud of the entire surface of the CAD model. After clicking, you will need to adjust the sampling interval for the point cloud in the pop-up window, and then click OK to generate the point cloud model.

    2. model cloud generate cad 2: generate a point cloud of only the part visible in the current view.

Add Pick Point by Adding a Pose

A model point cloud should be generated before adding pick points.

Preparation

Point cloud acquisition has been completed in the Matching Model and Pick Point Editor.

Workflow

  1. Click the model cloud set pick point add 1 button on the toolbar to add a pose as a pick point to the point cloud model of the target object.

    model cloud set pick point add 2

  2. Select the pick point in the Model Files List, and adjust its position. There are two ways you can adjust a pick point:

    1. By dragging the manipulator on the pick point: While holding the Ctrl key, click and drag a manipulator to move the pick point along the axis of this manipulator. A manipulator is successfully selected if it turns yellow after being clicked. In the figure below, the left image is before selection and the right after.

      model cloud set pick point add 3

    2. By editing the pose data: Pose editing can be done below CAD Files List.

We Value Your Privacy

We use cookies to provide you with the best possible experience on our website. By continuing to use the site, you acknowledge that you agree to the use of cookies. If you decline, a single cookie will be used to ensure you're not tracked or remembered when you visit this website.

  • Preference
  • I accept
  • I don't accept